HiRO H50188 - Manual (Page 3)

1
WLAN ADSL2+ Router
1.0 About This Manual
This manual is developed for users, system managers, network managers, and contains
installation, configuration, and operation of the WLAN ADSL2+ Router.
1.1 Document Objectives
The objectives of this manual are to describe all the initial hardware installation and basic
configuration procedure for the WLAN ADSL2+ Router. After completing the installation and
basic configuration procedures, you can then use the appropriate contents to more completely
configure your system.
1.2 Product Overview
This section provides an overview of the WLAN ADSL2+ Router. It also describes the general
applications available with the WLAN ADSL2+ Router.
1.3 Product Description
WLAN ADSL2+ Router is a low cost, high performance and high-speed device that provides a
full rate ADSL2+ Router with the superb reliability and a complete solution for home and office
router. WLAN ADSL2+ Router can have a maximum downstream data rate of up to 24Mbps
and an upstream of up to 1Mbps. When configured as a DHCP server, it will assign IP address
to every connected PC and acts as the only externally recognized Internet device on your local
area network. With build-in NAT, WLAN ADSL2+ Router serves as an Internet firewall,
protecting your network from being accessed by outside users. You can safely enjoy the new
generation broadband Internet with WLAN ADSL2+ Router.
Note! This section documents general product features available in the WLAN
ADSL2+ Router product series. Please refer to the release notes for a current list
of upgraded hardware and software specifications.