Brother HL-1660E - Manual (Page 179)

USER’S GUIDE
7–4
Error Message Meaning Action
42 CARD FULL Card overflow Delete unnecessary macros or
fonts, or use a new card.
See page 4-32.
43 CARD W ERROR Card write error Set the write protect switch of
the card to OFF if it has been
set to ON. Use a new card. If
the same error occurs, consult
your dealer or service
personnel.
44 SIMM ERROR Incorrect installation of
SIMMs Install SIMMs correctly,
referring to the printed error
message.
See page 5-7.
45 MIO ERROR Error in communication with
the MIO card Install the MIO card correctly.
See page 5-6.
46 OPT IO ERROR Connection error with
optional feeders and duplex
unit. Check the interface cable
connection between the
printer and the fitted option.
47 CARD R ERROR Card read error Use a new card. If the same
error occurs, consult your
dealer or service personnel.
XX SIZE ERROR Paper of incorrect size is
loaded into XX. XX is T2/
DX. Set the correct size of paper in
T2 or for duplex printing.
See “Paper Handling” in
Chapter 3.
IGNORE DATA
(BR-Script 2 mode only)
Data is ignored because of an
error in the PostScript ®
language program.
Press the RESET switch.
If the same error occurs, you
may need to add optional
SIMM memory.
See page 5-7.