Brother HL-1660E - Manual (Page 114)

CHAPTER 4 CONTROL PANEL
4–47
INPUT 14M
BUFFER 15 SQUARES
SIZE
5 SQUARES 4M
100K
51K 1 SQUARE 30K
30K
7M 14M 26M
RAM SIZE
Fig. 4-7 Input buffer size
SAVE SETTINGS
Suppose you share this printer with others who want different panel switch
settings or you use the printer with different settings.
Since you can save the current settings in the printer’s memory, you can
easily reset the printer to your necessary settings after they are changed.
For resetting the printer,
see “RESET Switch” in Chapter 4.
Use the panel switches to set the configuration of the printer to your needs
and then enter this mode menu to save your settings. Two sets of user
settings can be saved in the printer as follows:
Display Message User Setting
SAVE SETTING 1 Save the current settings as No. 1 in the
printer’s memory.
SAVE SETTING 2 Save the current settings as No. 2 in the
printer’s memory.
If you want to check the user settings, you can print out a list of the
settings with the TEST switch.
See “TEST Switch” in Chapter 4.
✒ Note
No user settings have been factory set.