GeoDesy Gigabit 1200 Auto Tracking link series - Manual (Page 5)

5
GeoDesy Kft. Telefon: 06-1-481-2050
H-1116 Budapest, Kondorfa str. 6-8. Fax.: 06-1-481-2049
E-mail: [email protected]
http://www.geodesy.hu
very hard receiver sensitivity. These two factors combined to provide one of the best
performing
FSO systems on the market today.
To meet the demands for every higher bandwidth,
GeoDesy FSO continues to
invest heavily in research and development with the newest product line which offers
Gigabit speeds being launched.
This manual describes the
GeoDesy FSO series of free space laser transmission
system.
The
GeoDesy FSO Next product range offers cost effective reliable free space
laser transmission for two Mbps up to 1000 Mbps data to the air, where a clean line
of site is available. It delivers the most effective point-to-point connection between
computer networks or telephone exchanges.
No need for installing cables, no rental costs, no licensing requirements.
Ideal for urban areas or city centres, where the use of these lines are expensive.
Suitable for factories or industrial environments where high noise level can interfere
with the transmitted data. The best choice to make a connection across rivers and
other natural or artificial obstacles, where cable is not available.
The transmission technique used in the
GeoDesy FSO devices provides
transparent and wire-speed data transfer with virtually zero latency. Because they
use infrared light as the transmission medium,
GeoDesy FSO system do not
require frequency licenses and the transmission is not effected by electro-magnetic
or radio-frequency interference. Basically the
GeoDesy FSO link can be
considered as a virtual fibre in the air, which ends in real fibre optic cable at both
ends.
Our product is built using high quality components for operation in even the most
adverse conditions.
Metal housing gives robust, waterproof environment for the electronics.
The shield protects the device from direct sunlight and provides extra air isolation.
The
GeoDesy FSO X systems comprise two laser-heads
one at each end. The interface connections are housed in the outdoor unit together
with the PSU of the system.
Best practises were employed in cost engineering throughout the development of
GeoDesy FSO .