GeoDesy Gigabit 1200 Auto Tracking link series - Manual (Page 20)

20
GeoDesy Kft. Telefon: 06-1-481-2050
H-1116 Budapest, Kondorfa str. 6-8. Fax.: 06-1-481-2049
E-mail: [email protected]
http://www.geodesy.hu
4.screen
AT mode: Manual / Auto
SPWR:0-10 AGC:0-1G:0-9
SPWR: (1-9=ok): Important that these signal power has no any connection to the
receiving level. 0 - too little light. 10: too much light. 1-9: Tracking is working, but the
optimum range is:3-8.
5.screen
SGM pos.: Pos,Pos
AFMode: auto or manual
Signal position: [0-100], [0-100] tracking signal position. X and Y position (in %), so
the system seeks 50 and 50 %.
Beam searching method: Beam-Search Algorithm: Try to find the laser beam if a big
and sudden movement have occurred which falls out of tracking field of view. Useful
to use on such installation sites where many movement of laser head can happen.
Possible levels: Disabled, Short, Long.
6.screen
Email address
7.3 UserInterface
This field halp you direct the Auto Tracking system and the Focus set system.