Garland MO QU 28000 FL INDUCTION MODULE-LINE COOKTOPS DUAL/QUAD - Manual (Page 29)

Installation RTCSmp Built-In Module-Line Dual/Quad Cooktops
Part # 4532415 Rev 3 (8/19/14) Page 29
Custom-Built Mounting Frame Example
A
Support bar for
strengthening the
countertop and
securing the mounting
frame.
B
A NON-MAGNETIC steel partition
plate between two coil carrier sheets
for quad models.
Retaining rails secured to taps with screws.
Easy to insert or remove coil carrier sheet
for maintenance and service by removing
screws and dropping at the front. (see (
F))
C
Support/Leveling
plates for securing/
leveling the glass
and the coil carrier
sheet(s).
D
A lip/flange for the glass to sit on.
Retaining rails hook
and hinge at the
back. (see (
G))
E
G
Cross-bar for attaching
the retaining rails and
partition plate.
F
Holes for screws to
compress further the coil
carrier sheet to the glass.
H
I
Assembly
View
Countertop
A C
Silicone Seal
B
Countertop
A
C
Retaining Rail
E
Ceran Glass Top
Silicone Gasket
Countertop
Support Bar
Shown
Cross Section View (simplified)
* Welded structure
recommended.
*
*
*
Tabs, attached to
cross bar, to hold
the retaining rails.
F G