Gamber-Johnson 7160-0493 - Manual

Rev.A INST-599
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
PS-001
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
INTERFACE - INTERMEC CV61
7160-0493
Printing Spec:
This instruction sheet is for the Intermec CV61
INSTALLATION INSTRUCTIONS
Product Form Revision
ITEM QTY PartNo DESCRIPTION
1 1 15019 INTERMEC CV61 INTERFACE BRACKET
2 1 7120-0604 HARDWARE BAG - INTERMEC CV61 INTERFACE
1.) Attach the interface bracket #15019 to the back side of the Intermec CV61
computer with the 1/4" fasteners and washers as shown. Torque to 85 IN/LBS.
2.) Mount the unit on the appropreate base with the 3/8" nuts and washers as
shown.
2
3/8" HARDWARE
1
INTERMEC CV61
1/4" HARDWARE
© Copyright 2013 Gamber-Johnson, LLC