Gamber-Johnson 7160-0082 - Manual

7160-0082 - Large Workstation
7160-0083 - Computer Mounting Platform for Large Workstation
7160-0081 - Vertical Surface Mount
7160-0104 - Large Workstation w/Computer Mounting Platform
7160-0105 - Large Workstation w/Vertical Surface Mount
INSTALLATION INSTRUCTIONS
Product Revision Form #
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Large Workstation and Options
Rev. B INST-359
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
The Workstation provides lockable storage for supplies and equipment.
A removable Clipboard/Storage Pocket is mounted on the exterior and can be repositioned
to either side.
Removable brackets allow Letter size hanging folders to be supported inside the
Workstation. Hanging Folder Brackets can be repositioned inside the Workstation allowing
folders to hang front-to-back or side-to-side.
Wiring access cutouts allow electronic and charging devices to be installed inside the
locked Workstation.
Carrying cutouts on sides aid in moving and installing the Workstation.
The Workstation weights approximatly 60-70 lbs, use caution when moving and installing.
The Workstation is typically installed between the driver and passenger seats with the
Clipboard/Storage Pocket toward the rear of the vehile.
This allows a computer mounting bracket (7160-0083 or 7160-0081) to be installed toward
the vehicle dash.
1 of 4
FIG. 1
7160-0082
Large Workstation
Wiring Access
Cutouts
Clipboard/Storage Pocket
Mounted on End or Sides
Carrying Cutouts
Hanging Folder Brackets