Gamber-Johnson 7160-0180 - Manual (Page 2)

Attaching a universal Keyboard to the Keyboard Tray:
Attach the keyboard to the keyboard tray with the 1" x 2" strips of VHB foam tape found in hardware bag
7120-0513.
1. Without removing the release liners place the VHB strips on the keyboard tray and place the keyboard on
top to make sure the Dual lock is located in the correct place for your application.
2. Once the location of the keyboard has been determined, remove the release liner from one side of the VHB
strips and attach the strips to the keyboard tray.
3. Remove the remaining release liners from the top sides of the VHB strips and attach the keyboard.
Thumb Screws
Removing the Keyboard Tray from the base:
The keyboard tray with the keyboard attached can be removed from the base mount by loosening the thumb
screws located on the bottom side of the base.
Various keyboard types
Keyboard Tray
VHB dual sided
foam Tape