Fz-g1 docking station feature identificaton – Gamber-Johnson 7160-0486 User Manual
Page 3
FZ-G1 DOCKING STATION FEATURE IDENTIFICATON
RF connections are configurable in the BIOS of
the FZ-G1 computer. The terms "UPPER" and "LOWER"
positon used in the BIOS of the FZ-G1computer
correlates with Gamber Johnson FZ-G1 Docking
Station "Ant 1" and "Ant 2" as follows: "UPPER" = "Ant 1"
and "LOWER" = "Ant 2".
Alignment Tabs
Top Hooks
Dual RF Connector
Ground Pins
Docking Connector
Button Latch
(Keyed alike,
or Keyed different)
Dual RF Output
Slide Plate
Base
Guide Block
(Can be removed for
use with FZ-G1 that has
an extended battery or
card slot attachment)
(2) USB
HDMI - If using HDMI cable, snap
ferrite (GJ# 15064 - Fair-Rite Part #
0431167281) supplied in the hardware
bag onto the HDMI cable as close to
the dock as possible
Video
Serial
Ethernet
15.6 Vdc Input
RF Switch - move to
outside position for
External RF Antenna
Cable Tie Openings
4X Mounting Studs
(1/4-20unc for model 7160-0486)
(M6-1.0 for model 7160-0487)