Gamber-Johnson 7160-0531-xx - Manual (Page 4)

Figure 4
be used for security purposes.
walls sticking out from the slide plate.
DOCKING AND UNDOCKING THE COMPUTER
downward possition. (See Figure 4)
Figure 3
3. Push downward on the wing turn
Figure 2
of the dock to remove.
4. (Optional) The key lock can now
(see Figues 1, 2 & 3)
latch until the slide plate is holding the
computer in place, then turn the latch
to hold the slide plate in the
1. Turn the computer off.
2. With the slide plate in the open
position, insert the bottom of the
computer into the docking station.
Then rotate the top of the comptuter
under the top hooks until the
computer is resting on the two vertical
TO UNDOCK THE COMPUTER
1. Turn the computer off.
2. Unlock if locked.
3. Rotate the wing turn latch 90 deg.
The slide plate is spring loaded and
should raise with your hand when you
release the pressure on the slide plate.
4. Rotate the top of the computer out
Figure 1
Vertical Walls