Gamber-Johnson 7160-0543-xx - Manual (Page 3)

3. Push downward on the wing turn
Figure 1
Figure 4
computer in place, then turn the latch
latch until the slide plate is holding the
Figure 3
The slide plate is spring loaded and
of the dock to remove.
should raise with your hand when you
(see Figues 1, 2 & 3)
release the pressure on the slide plate.
to hold the slide plate in the
4. (Optional) The key lock can now
downward possition. (See Figure 4)
be used for security purposes.
4. Rotate the top of the computer out
1. With the slide plate in the open
position, insert the bottom of the
computer into the cradle.
Then rotate the top of the comptuter
under the top hooks until the
computer is resting on the two vertical
walls sticking out from the slide plate.
TO REMOVE THE COMPUTER
1. Unlock if locked.
3. Rotate the wing turn latch 90 deg.
Vertical Walls
INSERTING THE COMPUTER INTO THE CRADLE
Figure 2