Gamber-Johnson 7160-0252 User Manual
Page 2
2 / 5
Two Rear Support Clips must be assembled at the time of installation.
Attach each Support Bracket to Tee Nut located in channel on back edge of Notepad™V
using a #8-32 x .38 Socket Head Screw.
Attach the Rear Clip to the Support Bracket with a #8 external tooth washer and
a #8-32 x .31 Nylon Patch Socket Head Screw.
The Notepad™V Universal Cradle is designed to be used with Gamber-Johnson
motion attachments, poles and vehicle bases.
The Sliding Mount Bar feature allows side-to-side adjustment of cradle to desired
mounting position.
Four .25 Flat Washers and .25-20 x .62 long Hex Head Screws are supplied
in the hardware bag to secure motion attachments to the bottom side of the cradle.
Sliding Mount Bars on bottom surface
.25-20 x .62 Hex Head Screws
& .25 Flat Washers
#8-32 x .38 Socket Head Screw
#8 External Tooth Washer &
#8-32 x .31 Nylon Patch Socket Head Screw
Rear Support Assembly
Vehicle Mounting