EZWatch TurboView DVR - Manual (Page 62)

62
items.
-
Since these functions make use of a memory function of the camera itself, user should set them in Camera OSD.
- Once user completes the setup, close the Camera OSD menu.
- User can conveniently use Tour and Pattern functions simply by clicking Tour and Pattern buttons.
- Particulars on how to setup each function on OSD Menu are found in the manual of a corresponding camera.
(NOTE)
Suppose a command for using Tour function is 71 ~ 79 + PSET and if you had set Tour to 70, use Preset No: 1 ~ 9 + Tour
button to benefit the Tour function (70 + 1~9).
5.1.6 System Log
 Press EVENT key and the System Log screen will appear.
 Please refer ‘SETUP>SYSTEM>System Log’ to learn different events listed on the System Log and see how to delete the
System Log.
5.1.7 Key Lock
 Press AUDIO>FF>FORWARD keys in sequence to operate the key lock function. This function is indicated by icon in
the lower portion on the right-hand side of the screen.
 Once the Key Lock function is activated, user cannot use any key. If wish to use a key, please enter the correct password to
release the key lock function. If Password is not required, simply press ENTER  key.
5.1.8 Emergency Recording
 When user presses EMERGENCY key, recording starts right away regardless of preset recording mode.
 Emergency recording is not operated while SETUP.
 Press Emergency key one more time to stop the emergency recording.
5.2 Search
 This involves searching recorded video to playback the wanted video of a specific date and time.
 Press SEARCH key on the viewing screen, or Click Search menu at “Function Keys” and the following Search menu will
appear.