EZWatch TurboView DVR - Manual (Page 61)

61
 In Pan/Tilt mode, the icon is displayed on the bottom of the screen.
 Following is the key usage found in Pan/Tilt mode.
Key Function
▲, ▼, , Up/Down/Left/Right rotation
Zoom out
Zoom in
Focus near
Focus far
Iris Close
Iris Open
Save Preset
Go to the Preset
Go to OSD main menu
Run Group Tour 1~9
Run Pattern 1~9

To use a mouse in Pan/Tilt mode, please move the cursor to the lower portion near the center of the screen. To use front
button in Pan/Tilt mode, please push setup button. A key pad control will show as follows:
 To save current camera number, select Preset No and button click.
 To move to preset, select preset No and button click.
 Available 1 ~ 255 Preset numbers can saved it depends on camera specification.
 As explained earlier in 4.4.2., press Menu button to pop-up PTZ camera OSD setup screen and set up Tour and Pattern