Barco DCS-200 - Manual (Page 34)

34 DCS-200 • User’s Guide
4. Operation
Control Overview
`зенкзд=lîÉêîáÉï
There are several ways to control the DCS-200:
• The front panel is ideal for all basic operations. Available controls include the
Display Section and the buttons in the Inputs Section and the Effects Section.
• The built-in web-based GUI is ideal for intuitive point-and-click operations. Refer
to Chapter 5, “
GUI Operations ” on page 103 for additional details.
• The DCS-200 can also be controlled remotely via Ethernet or Serial
communications. See Appendix B “
Remote Control ” on page 127 for additional
details.
mçïÉêJré=fåáíá~дбт~нбзе
After connecting power to the DCS-200, locate the power switch on the back of the chassis,
and turn power
ON . While the system is initializing, the following messages are displayed:
Figure 4-1. System Initialization Message 1 (sample)
Figure 4-2. System Initialization Message 2 (sample)
Figure 4-3. System Initialization Message 3 (sample)
D C S - 2 0 0
B a r c o
I n i t i a l i z i n g . . .
P r o g r a m L o a d i n g
p l e a s e w a i t . . .
T r a n s f e r r i n g t o
m a i n p r o g r a m .