Barco DCS-200 - Manual (Page 137)

DCS-200 • User’s Guide 137
_K==oÉãçíÉ=`зенкзд
Remote Commands
• List Response:
2:"720x480p"
4:"720x575p"
5:"640x480 @59.94"
Etc.
bafaqvmb
• Description: Sets EDID type. This command is valid only for the DVI input
channels.
• Command Format: EDIDTYPE -i(input) -t(EDID type)
• Parameters:
-i (input): 7-8
-t (EDID type): 0 - analog, 1 - digital (Default: 1)
• Query Format: EDIDTYPE -i(input) -?
• Query Response: EDIDTYPE -i(input) -t (EDID type) --min 0 --max 1
• List Format: EDIDTYPE -i(input)
• List Response:
0:"Analog"
1:"Digital"
cobbwb
• Description: Freezes the input on program.
• Command Format: FREEZE -m (mode)
• Command Params: -m mode: 0-off, 1-on (Default: off)
• Query Format: FREEZE -?
• Query Response: FREEZE -m (mode) --min 0 --max 1
f^ag
• Description: Selects the input path to be adjusted (preview or program).
• Command Format: IADJ -p (path)
• Parameters:-p (path): 0-preview, 1-program
• Query Format: ADJ -?
• Query Response: IADJ -p (path)
• List Format: IADJ --list
• List Response: 0: "PREVIEW"
1: "PROGRAM"
f^o=
• Description: Adjust Input Aspect Ratio
• Command Format: IAR -i (input) -r (ratio) -c (custom ratio)