Remote commands, Ethernet commands, Dhcp – Barco DCS-200 User Manual
Page 134: Emac, Dhcp emac, In appendix b, To the, Section on, Oéãçíé=`згг~езл, Bíüéêåéí=`згг~езл
134
DCS-200 • User’s Guide
_K==oÉãçíÉ=`зенкзд
Remote Commands
oÉãçíÉ=`згг~еЗл
This section lists DCS-200 remote commands, in the following categories:
•
•
•
•
•
•
bíÜÉêåÉí=`згг~еЗл
ae`m
•
Description: Enables/disables DHCP mode.
•
Command Format: DHCP -m (mode)
•
Command Params: -m mode: 0-disable, 1-enable (default: on)
•
Query Format: DHCP -?
•
Query Response: DHCP -m (mode) --min 0 --max 1
bj^`
•
Description: Gets MAC Address.
•
Command Format: N/A
•
Command Params: N/A
•
Query Format: EMAC -?
•
Query Response: EMAC -a (addr)
•
Response Params: -a (addr): MAC address formatted xx.xx.xx.xx.xx.xx