Enerpac WCR-Series - Manual (Page 16)

16
ENGLISH
7 Replacement parts and
recommended tools
7.1 To order replacement parts
For replacement parts information,
refer to the Enerpac repair parts
sheet for your wrench model. Repair
parts sheets are available on the
internet at www.enerpac.com.
Have the following information ready
when ordering replacement parts:
- Wrench model and serial numbers
(for both drive unit and cassette).
- Approximate date of purchase.
- Part number and description of each
part being ordered.
7.2 Recommended tools for performing
maintenance and repairs
– 1 7/8" A/F spanner
– 1 3/4" A/F spanner
– 1 5/8" A/F spanner
– 1 Circlip pliers
– 1 Seal extraction tool
– 1 ø 4 mm x 5 mm LG x 25 mm PCD
pin spanner
– 1 6 mm A/F Allen key
– 1 4 mm A/F Allen key
– 1 3 mm A/F Allen key
– 1 2,5 mm A/F Allen key
– 1 Copper hammer
– 1 3 mm terminal screwdriver
Notes:
A/F = Across Flats
PCD = Pitch Circle Diameter