How to use this guide – ElmoMC SimplIQ Digital Servo Drives-Solo Trombone Installation Guide User Manual
Page 15
Solo Trombone Installation Guide
Introduction
MAN-SOLTROIG (Ver. 1.203)
15
2.4. How to Use this Guide
In order to install and operate the Solo Trombone servo drive, use this manual in conjunction
with a set of Elmo documentation. Installation is your first step; after carefully reading the
safety instructions in the first chapter, the following chapters provide you with installation
instructions as follows:
•
Chapter 3 - Installation
, provides step-by-step instructions for unpacking, mounting,
connecting and powering up the Solo Trombone
•
Chapter 4 - Technical Specifications
, lists all the drive ratings and specifications
Upon completing the instructions in this guide, the Solo Trombone servo drive should be
successfully mounted and installed. From this stage, you need to consult higher level Elmo
documentation in order to set up and fine-tune the system for optimal operation:
•
The SimplIQ Software Manual, which describes the comprehensive software used with the
Solo Trombone
•
The SimplIQ Command Reference Manual, which describes, in detail, each software
command used to manipulate the Solo Trombone motion controller
•
The Composer Software Manual, which includes explanations of all the software tools that
are part of Elmo’s Composer software environment.