ElmoMC SimplIQ Digital Servo Drives-Bell Installation Guide - Manual (Page 35)

Bell Installation Guide Installation
MAN-BELIG (Ver. 1.302
| www.elmomc.com
35
Table of Contents
3.11. I/Os
The Bell has 6 Digital Inputs, 2 Digital Outputs and 1 Analog Input.
I/O J1 J2 Total
Digital Input 6 - 6
Digital Output 2 - 2
Analog Input - 1 1
3.11.1. Digital Input
Each of the pins below can function as an independent input.
Pin Signal Function Pin Position
J1/9 IN1 Programmable input 1
(general purpose, RLS, FLS, INH)
J1/10 IN2 Programmable input 2
(general purpose, RLS, FLS, INH)
J1/11 IN3 Programmable input 3
(general purpose, RLS, FLS, INH)
J1/12 IN4 Programmable input 4
(general purpose, RLS, FLS, INH)
J1/13 IN5 High Speed Programmable input 5
(event capture, Main Home,
general purpose, RLS, FLS, INH)
J1/14 IN6 High Speed Programmable input 6
(event capture, Auxiliary Home,
general purpose, RLS, FLS, INH)
J1/15 INRET Programmable input return
Table 6: Digital Input Pin Assignments