Elkhart Brass Sidewinder 7161 EXM UHP - Manual (Page 12)

EXM UHP– Installation Instructions
(Step 2 – Configure the System)
12
On the Input Controllers tab, enter the serial numbers
for all input controllers in your EXM system.
Please note that the top line is designated for the
Primary input controller. The controller designated as
the Primary will override any other commands given
to the system from Secondary controllers.
Also, please note that the Serial Number entered for
the Joystick/OEM is actually the number listed on the
OEM Interface Module used with that Joystick.
7 8
9
In the drop down menu, the input controller type for
each controller must be selected.
Also, choose the type of communication that the
controller will use; CAN line.
The Input Controls tab is also the second opportunity
to terminate components within your EXM system.
Please refer back to configuration step 5 for an
explanation of CAN communication and terminating
system components.