Eberspacher EasyStart R - Manual (Page 8)

8
Operation and Adjustment
Activate mobile unit
Display Use the mobile unit to establish the connection with the
stationary unit.
press until the menu bar appears in the display. The
release the key. The symbol and text
appear briefly, then the temperature is displayed.
The radio remote control is activated.
• If the key is not released after the menu bar ap-
pears the mobile unit switches itself off.
• During data transmission (display SENd) the display
lighting switches off. After the data transmission has
finished the display lighting is switched back on.
• Possible displays such as , and are de-
scribed in the chapter “What to do if …?” from page 23.
The following actions are possible:
• Switch over from temperature display to time and
back, press.
• Select functions in the menu bar with or ,
confirm selection with .
The further procedure is described in the relevant sec-
tion for the selected function.
Please note!