Eberspacher EasyStart R - Manual (Page 18)

18
Program preset times
Operation and Adjustment
Display
When selecting (heater with deactivated runtime
calculation), or the operating time is displayed and
can be adopted with or with or adjusted
and confirmed with .
The adjustment is completed.
The assigned preset memory locations
appear in the display. The preset memory
activated as next is underlined in the
display and the corresponding weekday is
also displayed. The same procedure is required to pro-
gram preset times in the preset memory
2 and 3.
Please note!
The following actions are possible:
• Switch over from temperature display to time and
back, press.
• Select functions in the menu bar with or ,
confirm selection with .
The further procedure is described in the relevant sec-
tion for the selected function.