Eberspacher EasyStart R - Manual (Page 13)

13
Activate mobile unit with (see page 8).
Select symbol with or .
Confirm selection with .
Ventilation is switched off.
Display
Operation and Adjustment
The following actions are possible:
• Switch over from temperature display to time and
back, press.
• Select functions in the menu bar with or ,
confirm selection with .
The further procedure is described in the relevant sec-
tion for the selected function.
If the symbol is not displayed in the
menu bar, “ventilate” mode is not possible
for the heater models used.
In “ventilate” mode of HYDRONIC water
heaters the vehicle blower is directly
controlled by by-passing heating mode
and in AIRTRONIC air heaters the heater’s
blower is directly controlled by by-passing
heating mode.
General information on the ”ventilate“ mode
• “Ventilate” mode is not provided for
upgraded independent heaters.
• If you have any further questions regard-
ing “ventilate” mode please contact your
installation workshop or call the service
phone number (see page 26).
Switch off ventilation – only possible if the symbol is displayed in the
menu bar (See page 13 for general information).
Please note!