Eberspacher EasyStart R - Manual (Page 23)

23
If the messages and are displayed, no control / operation possible.
A running heater can only be switched off using the button in the vehicle.
What to do if …?
Displays
Description
Poor communication between the mobile unit and stationary unit.
Data is received. However, it is faulty.
Possible causes Remedy
Distance between mobile unit and vehicle
at the edge of the range . Change position relative to vehicle e. g.
hold the mobile unit higher or move it to
the side. Reduce distance from vehicle.
Dense buildings between mobile unit and
vehicle? Reduce distance. If possible, reinstate
visual contact with the vehicle.
Several Easy Start radio remote controls
are operated simultaneously. Reactivate mobile unit after a pause .
Description
Communication between the mobile unit and stationary unit is not possible.
Possible causes Remedy
Distance between mobile unit and vehicle
too large. Reduce distance.
Several Easy Start radio remote controls
are operated simultaneously. Reactivate mobile unit after a pause .
Mobile unit has not been taught. Teach mobile unit as described in the
installation instruction.
Please note!