Eberspacher EasyStart R - Manual (Page 24)

24
What to do if …?
Description Remedy
A fault occurs in the heater during opera-
tion (e. g. fuel shortage or interruption in
the diagnostics cable). See heater‘s installation instructions for
troubleshooting advice.
Description Remedy
Stationary unit is in learn mode. Teach mobile unit as described in the
installation instruction.
Description Remedy
The mobile unit‘s battery is very weak.
Data transmission is not possible. Replace battery (see page 22).
Description
The “Set timer” display appears after the mobile unit is activated.
Possible cause
Remedy
Stationary part has been discon-
nected from the vehicle‘s battery. All
programmed preset times have been
deleted. Set time (see page 9).
Displays