Eberspacher EasyStart R - Manual (Page 22)

22
Replace battery
• Use a 1 Euro coin to turn
the bayonet fastening of the
battery cover in the direction
of the arrow.
• Remove the battery cover.
• Check the cover seal for damage.
• Remove dead battery.
• Insert new battery. The battery has been
correctly inserted if the plus pole symbol
and the type designation of the battery
can be read.
• Put on the battery cover. The drip-
shaped marking must point
to the web between the
recesses.
• Use a coin to turn the
bayonet fastening of the
battery cover in a clockwise direction
until the slit reaches the vertical position.
• Activate mobile unit (see page 8).
Maintenance
Charged status of the
mobile unit‘s battery
(display in mobile unit)
Battery ok
Battery adequate
Battery weak
(replace soon)
Emergency mode,
change battery immedi-
ately
If the status display of the mobile unit
indicates a weak battery, purchase a
CR 2430 type round cell battery made by
Varta, Sony or Renata, as recommended
by JE-Eberspächer.