Eberspacher EasyStart Timer Operating instructions - Manual (Page 9)

VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn | 9
3 OpeRATiOn AnD seTTing/ADjusTMenT
start display aftEr switchiNg ON
17:30 21 °C
if no menu item is activated, the start display
appears with a flashing heater symbol in the Menu
bar, with the current time and the actual temperature
in the status area.
Other possible actions are:
ƒ heATing iMMeDiATeLy with LOngpRess.
ƒ heATing On with shORTpRess, in addition con-
firm and if applicable set the temperature setpoint
and operating time,
see page 11 .
ƒ select a new menu item.
displays fOr actiVatEd mENu itEms
heATing On
60 min 21 °C
Other possible actions are:
ƒ heATing OFF, see page 10 and 12 .
ƒ select a new menu item.
VenTiLATiOn On
60 min 21 °C
Other possible actions are:
ƒ VenTiLATiOn OFF, see page 15 .
ƒ select a new menu item.
ADD-On heATeR heATing On
90 min
Other possible actions are:
ƒ ADD-On uniT heATing OFF, see page 19 .
ƒ select a new menu item.
ADD-On heATeR VenTiLATiOn On
90 min
Other possible actions are:
ƒ ADD-On uniT VenTiLATiOn OFF, see page 19 .
ƒ select a new menu item.