Eberspacher EasyStart Timer Operating instructions - Manual (Page 8)

8 | VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn
sTATus AReA
if no menu item is activated, the current time and, if
an (optional) temperature sensor is connected, the
temperature in the vehicle interior are displayed in
the status area.
start display:
ƒ Time, e.g. 17:30
ƒ Temperature in the vehicle interior, e.g. 21 °C.
if a menu item is activated (heating, ventilation, add-
on unit, settings or program / preselection), differ-
ent information is displayed in the status area; this
appears and described in the relevant sections.
subMenu
 107 min 
08:30
120 min
Menu bar
input area
display:
e.g. heATing On / Operating time 107 min.
in the submenu, the symbol of the selected menu
item appears in the middle of the display.
The corresponding set value is displayed flashing in
the entry area and can be set using the
or
button and confirmed with the button.
3 OpeRATiOn AnD seTTing/ADjusTMenT
maiN mENu
17:30 21 °C
Menu bar
status area
Menu bAR
The following menu items can be selected.
symbol function
heating On / OFF
Ventilation On / OFF
Add-on unit On / OFF
(e.g. a second heater)
settings
program / preselection
plEasE NOtE!
The symbol for the ADD-On uniT menu item
must be activated in the Workshop menu; contact the
installation workshop.
The
symbol for the VenTiLATiOn menu item is
now displayed, if the heater supports this function.
Only the and symbols are displayed in vehi-
cles in ADR mode. if the heater supports the VenTiLA-
TiOn function the
symbol is also displayed.