Eberspacher EasyStart Timer Operating instructions - Manual (Page 5)

VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn | 5
2 OVeRVieW
Easystart timEr
The easystart Timer can be used to make the neces-
sary settings for operation of the heater and / or the
add-on unit.
ButtON fuNctiONs
LOngpRess button
The button must be pressed for longer than
2 seconds.
The heater is switched on immediately if On or OFF
appears in the display (except if programming is run-
ning or while making settings).
shORTpRess button
The button must be pressed for less than 2 seconds
– if the display shows OFF  easystart Timer On,
the start display appears.
– a selected function is confirmed.
– inputs are confirmed.
LOngpRess button
The button must be pressed for longer than
2 seconds
– all functions are ended.
– if the display shows OFF  easystart Timer On,
the start display appears.
shORTpRess button
The button must be pressed for less than 2 seconds
– the displayed, activated function is ended, other
activated functions are retained.
– with each shORTpRess the display changes to a
next-higher level up to easystart Timer OFF.
– the start display appears and no function is active:
 easystart Timer OFF.
– easystart Timer is in submenu  the setting is
exited, already set values are not saved.
– if the display shows OFF  easystart Timer On,
the start display appears.
press button 1x / keep pressed
– easystart Timer is in the Main menu and the start
display appears  in the Menu bar the next, right-
hand symbol appears in the middle and flashing.
– easystart Timer is in the  submenu, the dis-
played value is changed (larger), or the next selec-
tion is displayed.
– if the display shows OFF  easystart Timer On,
the start display appears.
press button 1x / keep pressed
– easystart Timer is in the Main menu and the start
display appears  in the Menu bar the next, left-
hand symbol appears in the middle and flashing.
– easystart Timer is in the  submenu, the dis-
played value is changed (smaller), or the next
selection is displayed.
– if the display shows OFF  easystart Timer On,
the start display appears.