Det-Tronics U7652B, C Unitized UV/IR Flame Detector - Manual (Page 21)

19 95-8385
ORDERING INFORMATION
When ordering, specify:
U7652B UV/IR Detector
U7652C UV/IR Detector with Auxiliary Relay
U7652C UV/IR Detector with 4 to 20 ma output
Detector housing materials:
—Copper-free red painted aluminum
—316 Stainless steel
Cover locking assembly (CENELEC certified equip-
ment only). Two locking assemblies are required per
detector. Refer to Figure14.
ACCESSORIES
Q9001G7001 Swivel Mount Assembly is recom-
mended for mounting the detector.
Q1113 Air Shield Assembly is intended for use in
locations with high levels of airborne contaminants.
Two air shield assemblies are required per detector.
W867 Explosion-proof UV/IR Test Lamp allows con-
venient on-site testing of the detector without the
need for an open flame.
W8067 Non Explosion-proof UV/IR Long Range
Test Lamp
RECOMMENDED SPARE PARTS
oi ring for UV detector 1 per 10 units
oi ring for IR detector 1 per 10 units
O-rings for UV and IR detectors 2 per 10 units
UV module with LEDs 1 per 10 units
IR module with LEDs 1 per 10 units
Motherboard for U7652B 1 per 10 units
Motherboard for U7652C with
Auxiliary Relay 1 per 10 units
Motherboard for U7652C with
4 to 20 ma output 1 per 10 units
Window Cleaner Squeeze Bottle (6) 1 per 10 units
UV/IR Window Maintenance Kit
1 per 40 units
Grease for O-rings 1 per 10 units
Capacitor (for increased protection
from ground transients) 1 per 10 units
Lubrication (for junction box
cover screws) 1 per 50 units
For assistance in ordering a system to fit your appli-
cation, please contact:
Detector Electronics Corporation
6901 West 110th Street
Minneapolis, Minnesota 55438 USA
Operator: (952) 941-5665 or (800) 765-FIRE
Customer Service: (952) 946-6491
Fax: (952) 829-8750
Web site: www.detronics.com
E-mail: [email protected]