Warm/cold start – Despatch 1500 Controller User Manual
Page 42
Page 36
Despatch/Watlow 1500 Control Instruction Manual
Figure 2 DIP Switch Location and Orientation
Warm/Cold Start
1.
A “Warm” start will save all programmed information in
the memory.
2.
A “Cold” start is a “Clean” startup condition. All
MEMORY IS DELETED and the controller will return to
default settings.
3.
Upon completion of “Cold” start, return the control to
“Warm” start, otherwise the control will return to the
default settings after each power loss.
4.
DIP Switch #6 determines a warm or cold start. Your
controller leaves the factory programmed for a warm
start.