Dascom T2150S Quick Start Guide Cutter Option - Manual (Page 7)

Quick start guide Installation
3
EN
GLIS
H
Installation
` Unpacking the printer Place the shipping carton containing the printer on a table near the place where you
want to install the printer. Make sure that the TOP indication or symbols point up-
wards.
Before installing the printer and the cut device, check that all the items are con-
tained in the package. Should any components be missing or damaged, contact
your dealer.
Printer’s carton ■ Printer
■ Quick start guide and CD-ROM
■ Power cord
■ Ribbon
Cut device carton ■ Cut device
■ Top cover
■ Rear cover
■ Safety and documentation note
■ Several small parts for optional tractors 2 and 3
Open the package and pull the printer out of the carton towards you. Get assistance
for removing, if necessary. Place the printer in the correct place and remove the
rest of the packaging.
Unpack the cut device.
Inspect the printer and the cut device for any visible transport damage.
If you should find any transport damage or if any accessory is missing, contact
your dealer.
Cutter-en.book Seite 3 Donnerstag, 3. Mai 2007 9:42 09