Dascom T2150S Quick Start Guide Cutter Option - Manual (Page 19)

Quick start guide Additional menu parameter
15
EN
GLIS
H
Additional menu
parameter With the cut device installed, the AutoCut parameter appears in place of the Au-
toTear parameter in the menu.
The printer detects the cut device during initialization and replaces the Tear func-
tion by the Cut function. All menu settings and escape sequences previously relat-
ing to the Tear function will then be applied to the Cut function.
Parameter group Parameter Description
AutoCut The Auto View, the Auto Cut, the Cut at
TOF or the Cut on Formfeed functions can
be optionally selected.
ViewCut=Off* With ViewCut=Off selected, the paper is
neither fed automatically to the View posi-
tion nor cut.
View=1s
View=3s
View=6s With Auto View selected, the previously
printed text is visible. The paper is
returned to the normal printing position as
soon as data are received. After the print-
out, the printer waits for the set period and
then returns the paper to the Auto View
position.
Cut=1s
Cut=3s
Cut=6s With Auto Cut selected, the paper’s active
length is the cutting position. The paper
returns to the normal printing position as
soon as data are received. After the print-
out, the printer waits for the set period and
then returns the paper to the cutting posi-
tion and cuts it (see also Setting the cut-
ting position).
Cut at TOF If Cut at TOF is selected, the paper is cut
whenever the form length is exceeded.
Cut on Formfeed If Cut on Formfeed is selected, the paper
is only fed when the printer receives a
FormFeed (0C hex) command.
Cutter-en.book Seite 15 Donnerstag, 3. Mai 2007 9:42 09