Dascom T2150S Quick Start Guide Cutter Option - Manual (Page 5)

Quick start guide Introduction
1
EN
GLIS
H
Introduction This Quick start guide describes the cut device for fanfold paper for your printer.
In addition to important safety instructions it contains all necessary information
on:
■ Unpacking the cut device
■ Installing the cut device
■ Additional menu options and how to enter these
■ New control sequences for the cut device
■ Technical specifications
For all other information on using your printer, refer to the standard Quick Start
Guide supplied with the printer and to the User Guide on the Online CD-ROM.
` Driver To operate the printer with the cut device, please use the driver provided for the
narrow printer version. This driver is included on the Online CD-ROM. You do
not need to make any specific adjustments.
` Symbols used Two special types of symbols are used in this manual to emphasize important in-
formation.
The CAUTION symbol emphasizes information which must be observed in order
to protect the user from injury and the printer from damage.
The NOTE symbol marks general or additional information on a certain subject.
STOP
Cutter-en.book Seite 1 Donnerstag, 3. Mai 2007 9:42 09