Dascom T2150S Quick Start Guide Cutter Option - Manual (Page 21)

Quick start guide Specifications
17
EN
GLIS
H
Specifications
` Cut device specifications
` Paper specifications
Cutting width 254 mm max.
Cutting accuracy 1 mm
Parallelism of cutting <2 mm
Cutting duration After positioning, 0,5 sec. (unidirectional)
Amount of cuts 360 forms/hour
Service life 500,000 cuts
Control By printer’s basic firmware
Power supply 24 V
Power consumption Average: 0.5 A
Maximum: 1.0 A
Electrical connector 10-pin plug
Acoustic noise level <50 dB(A)
Safety standards ISO 950, EN60950; UL 1950; CSA 22.2-950; GS and
CE report; UL Listing; cULus
Weight 1.4 kg
Tractor 1 and 2, single-layer (matrix printer and ink printer)
Paper weight
Paper width
Paper length 60–120 g/m 2
76–254 mm (3–10")
76–559 mm (3–22")
Tractor 1 and 2, multi-layer (matrix printer)
Paper weight
Paper width
Paper length
Paper thickness
Copies 1. Blatt 45–65 g/m 2 , copies 45–56 g/m 2
76–254 mm (3–10")
76–559 mm (3–22")
max. 0,5 mm
1 + 3
Tractor 3 (matrix printer)
Paper weight
Copies 60–90 g/m 2
1 + 1 (according to printer specifications)
Paper tray 100 sheets max. (80 g paper) face down
Cutter-en.book Seite 17 Donnerstag, 3. Mai 2007 9:42 09