Dascom LA650+ Quick Start Guide - Manual (Page 26)

Paper handling Quick start guide
24
Insert the single sheet straight as far into the input tray as pos-
sible.
Press the Online key to set the printer to ready status.
The sheet is automatically loaded when the printer is in on-
line mode and receives data from the computer.
The printer reports a paper out condition by displaying Load
paper from single and beeping.
Only press the Load (4) key if you want to load paper before starting the printout.
` Paper transport Loaded paper (fanfold paper/single sheets) can be transported in the printer in
several ways.
Make sure that the printer is in offline mode (Pause); press the Online key, if
necessary.
„ Key Park (1): If fanfold paper is loaded in the printer, it is fed to the park posi-
tion or the tear position. If a single sheet is loaded, it is ejected.
„ Key (2): Short keypress: Paper is transported upwards step by step
Long keypress: Continuous transport upwards.
„ Key (3): Short keypress: Paper is transported downwards step by step
Long keypress: Continuous transport downwards.
„ Key LF/FF (4): Short keypress: Line Feed (LF) is effected
Long keypress: Form Feed (FF) is effected.
„ Key Online: Moves Paper to tear position if the automatic tear function is acti-
vated.
Pause Front1
Online
Setup
Park LF/FF
2 1 3 4
Quick Start-en.book Seite 24 Freitag, 16. Oktober 2009 1:20 13