Dascom LA650+ Quick Start Guide - Manual (Page 25)

Quick start guide Paper handling
23
ENGLISH
Single sheets
Some printer models are designed for fanfold pa-
per operation only and therefore do not feature a
single sheet feeder. The front cover can therefore
not be opened on these models.
Make sure that the printer is set to single sheet mode. If
necessary, change the paper type (see “Changing the paper
type”, page 18).
Press the latch at the middle of the front cover. The single
sheet input tray opens downwards.
Align the left paper guide with the mark on the left of the
single sheet input tray marking the first printing position.
Adjust the right paper guide to the width of the paper used.
Quick Start-en.book Seite 23 Freitag, 16. Oktober 2009 1:20 13