Dascom LA650+ Quick Start Guide - Manual (Page 21)

Quick start guide Paper handling
19
ENGLISH
Press the Online key to set the printer to ready status. When the printer receives
data from the computer, the single sheet is automatically loaded. Press the Load
(4) key to load the single sheet before starting the printout.
Changing the paper type in the
Setup menu When you want to change the paper source in the Setup menu, proceed as follows:
„ Press the Setup key, then the Paprpath key (3).
„ Select the desired paper path by pressing < (2) or > (3).
„ Confirm the selection by pressing the Set key (1).
Ready Single
M1 EPS Load Online
Setup
2 1 3 4
Quick Start-en.book Seite 19 Freitag, 16. Oktober 2009 1:20 13