Dascom LA650+ Quick Start Guide - Manual (Page 23)

Quick start guide Paper handling
21
ENGLISH
Open the coloured latch lever and align the tractor so that the
first printing position on the paper matches the
X mark on the
printer housing.
Lock the coloured lever again.
Place fanfold paper into the left-hand tractor.
Open the coloured latch lever of the right-hand tractor and
align it to the paper width.
Insert the fanfold paper into the right-hand tractor.
Make sure that it is inserted by the same length as on the left-
hand tractor in order to avoid any paper jam.
Close the tractor flap and lock the tractor by turning the trac-
tor lever to the rear.
Do not tension the paper excessively to avoid tear-
ing the perforation holes; do not allow excessive
slack since in this case the paper will bulge and
there may be problems in the feeding process.
Quick Start-en.book Seite 21 Freitag, 16. Oktober 2009 1:20 13