Dakota Ultrasonics MMX-7 - Manual (Page 33)

MMX-7 Data Logging Ultrasonic Thickness Gauge
29
Selecting the Transducer Type
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the PROBE menu is highlighted and displaying the submenu items.
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until TYPE is highlighted.
3) Press the ENTER key to display the list of transducer types.
4) Press the UP and DOWN arrow keys to scroll through the transducer list
until the appropriate type is highlighted.
5) Press the ENTER key to display the confirmation screen.
6) Press the OK key to select the transducer and return to the menu screen, or
ESC to cancel the material selection.
Now that the proper transducer has been selected and connected to the MMX-7, the
measurement mode must be chosen according to the type of application. Following
the recommendations in the prior chapter, there are three different ways to select the
measurement mode as follows: