Dakota Ultrasonics MMX-7 User Manual

Page 20

Dakota Ultrasonics

3.7 UTIL (utilities) – Menu

Scan Mode: This function enables a hi speed scan mode that increases the overall
sample rate from the standard 4 measurements a second to 32 measurements a
second. Refer to page 54 for further info.
Alarm Status: Toggles alarm mode on or off. Refer to page 55 for further info.
Alarm LO Limit: Gives the user the ability to set the LO limit parameter. If the
measurement falls below this value, a red light will illuminate and sound the internal
beeper. Refer to page 56 for further info.
Alarm HI Limit: Gives the user the ability to set the HI limit parameter. If the
measurement exceeds this value, a red light will illuminate and sound the internal
beeper. Refer to page 57 for further info.

3.8 XFER (transfer) – Menu

Backup Setups: Enables the user the ability to backup the setups currently stored
in the MMX-7 to a PC via RS232 port. Refer the help section of the MMX-
7sonicview software for a complete electronic manual.
Restore Setups: Enables the user the ability to restore the setups currently saved
on a PC to an MMX-7 via RS232 port. Refer the help section of the MMX-
7sonicview software for a complete electronic manual.
Backup Grid: Enables the user the ability to backup grids currently stored in the
MMX-7 to a PC via RS232 port. Refer the help section of the MMX-7sonicview
software for a complete electronic manual.
Restore Grid: Enables the user the ability to restore grids currently saved on a PC
to an MMX-7 via RS232 port. Refer the help section of the MMX-7sonicview
software for a complete electronic manual.
About: Provides the user with Dakota Ultrasonics contact information and the
MMX-7 software version. Refer the help section of the MMX-7sonicview software
for a complete electronic manual.