Traceable touch tachometer instructions, Control company – Control Company 4261 TOUCH TACHOMETER User Manual

Page 2

Install Convex adaptor or Concave tip on the shaft of the

adaptor.

The Tachometer for measuring speeds of rotating objects

in RPM, M/Min, Ft/Min, Td/Min for different purposes.

Press UNIT key once from preset RPM (right corner

indicator) to left bottom corner M/Min, press UNIT key

again, Ft/Min appears in the middle.

Press the UNIT key once more, Yd/Min appears at the

right corner, press again to RPM unit. See the following

diagram from RPM unit to Yd/Min:
CAUTION

Injury or damage may occur if the specified ranges of the

linear or contact adaptor are exceeded!

MAINTENANCE

Case Cleaning

Use caution with a damp cloth to clean the exterior hous-

ing, ensure no water or soap is allowed inside the meter,

or on the lens.

BATTERY REPLACEMENT

A battery icon appears is the indication that the battery

voltage has fallen into the critical region (6.5 to 7.5V).
Open the Battery Compartment and remove the battery,

then install a new battery and replace the cover.

WARRANTY, SERVICE, OR
RECALIBRATION
For warranty, service, or recalibration, contact:

CONTROL COMPANY

4455 Rex Road

Friendswood, Texas 77546 USA

Ph. 281 482-1714

Fax 281 482-9448

www.control3.com

Control Company is ISO 9001

Quality-Certified by DNV and

ISO 17025 accredited as a

Calibration Laboratory by A2LA.

Traceable

is a registered trademark of

Control Company.

TRACEABLE

TOUCH

TACHOMETER

INSTRUCTIONS