Network setup, Ip setup – CCTV Camera Pros iDVR-E Series Video Surveillance Recorders Product Manual User Manual
Page 44

43 DIGITAL VIDEO RECORDER
8. Network Setup
The static service consists of an IP address that remains constant for the duration of the
contract of the internet service, whereas the dynamic service consists of an IP address that
frequently changes every time a new connection is made through the provided modem, or
recurrently in a given period of time. Though most internet service providers offer both
solutions, this manual will distinguish the two solutions according to the commonly available
service type to configure the DVR for the networking purposes.
8.1. IP setup
1
.
Us
e Direction buttons [
] to select “NETWORK” menu. Then, press [ENTER] button to
display “Network”.
2
. Use Down button [ ] to specify the detail.
3
. Use [-, +] button to change the value.
4
. Save changes and exit the menu, press [ENTER] button.
Exit the menu without making changes, press [CANCEL] button.
ITEM
ADJUSTMENT
CONFIG
y
STATIC IP: Edit IP address, Gateway and Net-mask.
y
DHCP: Dynamic Host Configuration Protocol.
It is automatically set on from Local DHCP if there is Local DHCP server (i.e.
The local Router) . if the DHCP is set to ON, the IP address, Gateway and
subnet Mask will be assigned by DHCP server.(i.g .The local area network
Router
IP Address
y
Enter the static IP address
Netmask
y
Enter the IP address of subnet mask.
Gateway
y
Enter the IP address for the internet gateway server.
DNS Server
y
Verify the name of the domain name system