CCTV Camera Pros iDVR-E Series Video Surveillance Recorders Product Manual - Manual (Page 37)

36 DIGITAL VIDEO RECORDER
6. Alarm Recording
Please verify the alarm record settings prior to starting alarm recording. Please note that
alarm recording is independent of any recording modes. Alarm record starts after Alarm
Record Enable.
6.1. Record Setup
1. Use Direction buttons [STWX] to select “ALARM” menu. Then, press [ENTER]
button to display “Alarm Record Setup”.
2. Use Left/Right buttons [WX] to select on TAP menu ( ).
3. Use Direction buttons [STWX] to select the Camera you wish to configure.
4. Use [-, +] button to change the value.
ITEM ADJUSTMENT
USE y Enable or Disable Alarm Recording on a per camera.
QUALITY
y Specify the record picture quality for each camera on Alarm Recording.
ULTRA Æ SUPER Æ HIGH Æ MIDDLE Æ LOW
RATE y Select recording rate of each camera when Alarm is triggered
AUDIO y Select audio recording: ON or OFF.
INPUT y Specify the type of Alarm input Device.
Press [MENU] button on each Item at first line to apply all setting for the rest channel.
5. Save changes and exit the menu, press [ENTER] button.
Exit the menu without making changes, press [CANCEL] button.