Carbolite TZF Series - Manual (Page 20)

Carbolite, Parsons Lane, Hope,
Hope Valley, S33 6RB, England.
Telephone: +44 (0)1433 620011
Fax: +44 (0)1433 621198
E-mail: [email protected]
The products covered in this manual are only a small part of the wide range of
ovens, chamber furnaces and tube furnaces manufactured by Carbolite for
laboratory and industrial use. For further details of our standard or custom built
products please contact us at the address below, or ask your nearest stockist.
Copyright © 2014 Carbolite Limited
For preventive maintenance, repair and calibration of all Furnace
and Oven products, please contact:
Carbolite Engineering Services
Telephone: +44 (0)1433 624242
Fax: +44 (0)1433 624243
Email: [email protected]
MF08 – 3.24 14/08/14
9.0 S PECIFICATIONS
Carbolite reserves the right to change specifications without notice .
9.1 Models Covered by this Manual
MODEL Max.
Temp.
Max.
Power
Work
Tube
Bore
1
Work
Tube
Length
Heated
Length Net
Weight
2
(°C) (kW) (mm) (mm) (mm) (kg)
Tube furnaces heated by Silicon Carbide elements
STF 15/180
1500°C 1.5 25-50 600-900 180 22
STF 15/450 1500°C 5.5 25-75 900-1200 450 35
STF 15/610 1500°C 6.0 25-75 1200-1500 610 40
TZF 15/610 1500°C 8.0 25-75 1200-1500 610 43
STF 16/180 1600°C 2.5 25-75 600-900 180 22
STF 16/450 1600°C 6.0 25-75 900-1200 450 35
STF 16/610 1600°C 7.0 25-75 1200-1500 610 40
TZF 16/610 1600°C 7.0 25/75 1200-1500 610 40
note 1: Standard tube internal diameters of 25, 50 and 75 are available;
intermediate tube
sizes can also be fitted.
note 2: Weights are approximate for horizontal models and do not include fittings
or vertical stands.
9.2 Environment
The furnaces contain electrical parts and should be stored and used in indoor conditions as
follows:
temperature: 5°C - 40°C
relative humidity: maximum 80% up to 31°C decreasing linearly to 50% at 40°C