Barco RS232 - Manual (Page 61)

2. Basic Commands
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
Receive (Awnser)
Start \xfe
Projector address \x01
Command[0] \x21
Command[1] \x0b
Data [0] \x01
Checksum \x2e
Stop \xff
2.24 Show Native resolution (ON/OFF), Write
Description
Enable/disables the native resolution function
Command
Command [0] \x20
Command [1] \xaf
Sent Data
Data[0] : one byte : 0 = OFF ; 1 = ON
2.25 Show Native resolution (ON/OFF), Read
Description
Reads whether the native resolution function is enabled or not
Command
Command [0] \x21
Command [1] \xaf
Reaturned Data
Data[0] : one byte : 0 = OFF ; 1 = ON
R5976884 RLM SERIES 04/04/2006 59