Barco RS232 - Manual (Page 145)

3. Advanced Commands
3.31.2 Copy File
Description
This command copies an image file (source file) to another file (destination file).
The destination file must always be a custom file."Syntax", page 9
Command
Command [0] \xc2
Send Data
strFilenameFrom
strFilenameTo
strFilenameFrom and strFilenameTo are strings of the C-string type."Syntax", page 9
3.31.3 Rename File
Description
This command renames an image file (source file) to another file (destination file).
The source file and the destination file must always be custom files.see "Syntax", page 9
Command
Command [0] \xc3
Send Data
strFilenameFrom
strFilenameTo
strFilenameFrom and strFilenameTo are strings of the C-string type.see "Syntax", page 9
3.31.4 Move File
Description
This command moves an image file (source file) to another file (destination file).
When moving a file from a location, this location is not deleted and can be used to store another new file.
The source file and the destination file must always be custom files."Syntax", page 9
Command
Command [0] \xc4
R5976884 RLM SERIES 04/04/2006 143