Barco RS232 - Manual (Page 31)

2. Basic Commands
Returned Data
Data [0] = Maximum Brightness value
Example
Reads the Maximum Brightness value of the projector, the awnser being \x64
Transmit
Start \xfe
Projector address \x01
Command[0] \x27
Command[1] \x02
Checksum \x30
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address
\x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
Receive (Answer)
Start \xfe
Projector address \x01
Command[0] \x27
Command[1] \x02
Data [0] \x64
Checksum \x8e
Stop \xff
2.7.13 Saturation increment
Description
Increments the saturation by one.
Command
Command [0] \x22
Command [1] \x03
2.7.14 Saturation, decrement
Description
Decrements the Saturation by one.
R5976884 RLM SERIES 04/04/2006 29